According to U.S. Census Bureau data issued in mid-March, the inventory-to-sales ratio for January hit 1.40, meaning there is an excessive amount of product in inventory relative to current sales. The January data was the most recent as of this writing. (The Census Bureau issues new figures monthly. Current data can be found here.)
Most of the excess goods were in the apparel and general-merchandise categories, although inventories in automotive seemed to be elevated as well, according to the trade group National Retail Federation (NRF).
The ratio spiked in early 2015 in the wake of the West Coast port slowdown that ended in February of last year after labor and management agreed to a five-year contract. After flattening out for about five months, the ratio resumed its incline in midsummer to hit the most recent Census levels. The ratio in January 2015 stood at 1.36. The higher ratio in January 2016 means that inventories, measured in the value of product, were $52.3 billion higher than a year ago, according to data from consultancy IHS.
There are various reasons for the elevated levels. Retailers had to work off inventories they had built up in advance of the West Coast port disruptions. Cargoes were so backlogged at docks or on ships that by the time the dispute ended and the goods finally moved onto store shelves, many were out of season and did not get sold. A strong U.S. dollar made U.S. exports more expensive in world markets, blunting one of the traditional channels for U.S. inventoried product. Retailers overcommitted to the 2015 peak holiday shopping cycle, and were bedeviled by a relatively warm 2015-2016 winter season that crimped demand for cold-weather products.
Retailers may have also overestimated the degree of the so-called fuel-price dividend, the extra consuming power a typical household gained from the dramatic decline in fuel prices over the past 20 months. Chris Christopher, director, U.S. macro and global economics at IHS, estimated the annualized per-household dividend at $750. This works out to about $15 a week—not enough for a family of four to do much with other than go out to eat, which had the added effect of cannibalizing sales of grocery stores, Christopher said.
Jack Kleinhenz, NRF's chief economist, said that over the past 18 months consumers have spent more on services than on goods, a shift that may have led to more unsold product. An added burden for retailers is government data showing price deflation in goods, but not in services, Kleinhenz said.
As a result, retailers are coping with the double whammy of less traffic and lower selling prices. "Retailers are really in a bind," said Christopher.
Elevated inventories have a direct effect on the trucking industry, which moves nearly 70 percent of all U.S. freight. Businesses have little reason to place orders until they work off excess inventories, which means there would be less demand for shipping services.
Bob Costello, chief economist of the American Trucking Associations (ATA), who has been sounding the inventory alarm for months, did more of the same in a statement disclosing February's truck tonnage results as measured by the group. "I'm still concerned about the elevated inventories throughout the supply chain," Costello said at the time. Consistently strong freight traffic will not materialize until inventories are drawn down, he added.
Kleinhenz said that data points reported in the early months of the year tend to be volatile, and may not presage a sustainable trend. He added that the increased activity in services could be a temporary condition. It is difficult to attribute the month-to-month movement in the ratio to any one factor, he said. "Balancing sales and inventory plans is truly an intricate challenge for retailers as they respond to an ever-changing market influenced by competition, weather, demographics, fashion, tastes, and anytime-anywhere spending by consumers," he said in an e-mail.
Christopher of IHS said there are brighter days ahead going into the spring and summer months. A combination of continued economic growth, more predictable weather patterns, and a weakening of the dollar will promote U.S. exports, he said, combining to end the inventory drag by the end of June. "There's help on the way in drawing down inventory," he said.
For retailers, suppliers, and their transport partners, that help can't come soon enough.
Supply chain planning (SCP) leaders working on transformation efforts are focused on two major high-impact technology trends, including composite AI and supply chain data governance, according to a study from Gartner, Inc.
"SCP leaders are in the process of developing transformation roadmaps that will prioritize delivering on advanced decision intelligence and automated decision making," Eva Dawkins, Director Analyst in Gartner’s Supply Chain practice, said in a release. "Composite AI, which is the combined application of different AI techniques to improve learning efficiency, will drive the optimization and automation of many planning activities at scale, while supply chain data governance is the foundational key for digital transformation.”
Their pursuit of those roadmaps is often complicated by frequent disruptions and the rapid pace of technological innovation. But Gartner says those leaders can accelerate the realized value of technology investments by facilitating a shift from IT-led to business-led digital leadership, with SCP leaders taking ownership of multidisciplinary teams to advance business operations, channels and products.
“A sound data governance strategy supports advanced technologies, such as composite AI, while also facilitating collaboration throughout the supply chain technology ecosystem,” said Dawkins. “Without attention to data governance, SCP leaders will likely struggle to achieve their expected ROI on key technology investments.”
The U.S. manufacturing sector has become an engine of new job creation over the past four years, thanks to a combination of federal incentives and mega-trends like nearshoring and the clean energy boom, according to the industrial real estate firm Savills.
While those manufacturing announcements have softened slightly from their 2022 high point, they remain historically elevated. And the sector’s growth outlook remains strong, regardless of the results of the November U.S. presidential election, the company said in its September “Savills Manufacturing Report.”
From 2021 to 2024, over 995,000 new U.S. manufacturing jobs were announced, with two thirds in advanced sectors like electric vehicles (EVs) and batteries, semiconductors, clean energy, and biomanufacturing. After peaking at 350,000 news jobs in 2022, the growth pace has slowed, with 2024 expected to see just over half that number.
But the ingredients are in place to sustain the hot temperature of American manufacturing expansion in 2025 and beyond, the company said. According to Savills, that’s because the U.S. manufacturing revival is fueled by $910 billion in federal incentives—including the Inflation Reduction Act, CHIPS and Science Act, and Infrastructure Investment and Jobs Act—much of which has not yet been spent. Domestic production is also expected to be boosted by new tariffs, including a planned rise in semiconductor tariffs to 50% in 2025 and an increase in tariffs on Chinese EVs from 25% to 100%.
Certain geographical regions will see greater manufacturing growth than others, since just eight states account for 47% of new manufacturing jobs and over 6.3 billion square feet of industrial space, with 197 million more square feet under development. They are: Arizona, Georgia, Michigan, Ohio, North Carolina, South Carolina, Texas, and Tennessee.
Across the border, Mexico’s manufacturing sector has also seen “revolutionary” growth driven by nearshoring strategies targeting U.S. markets and offering lower-cost labor, with a workforce that is now even cheaper than in China. Over the past four years, that country has launched 27 new plants, each creating over 500 jobs. Unlike the U.S. focus on tech manufacturing, Mexico focuses on traditional sectors such as automative parts, appliances, and consumer goods.
Looking at the future, the U.S. manufacturing sector’s growth outlook remains strong, regardless of the results of November’s presidential election, Savills said. That’s because both candidates favor protectionist trade policies, and since significant change to federal incentives would require a single party to control both the legislative and executive branches. Rather than relying on changes in political leadership, future growth of U.S. manufacturing now hinges on finding affordable, reliable power amid increasing competition between manufacturing sites and data centers, Savills said.
The number of container ships waiting outside U.S. East and Gulf Coast ports has swelled from just three vessels on Sunday to 54 on Thursday as a dockworker strike has swiftly halted bustling container traffic at some of the nation’s business facilities, according to analysis by Everstream Analytics.
As of Thursday morning, the two ports with the biggest traffic jams are Savannah (15 ships) and New York (14), followed by single-digit numbers at Mobile, Charleston, Houston, Philadelphia, Norfolk, Baltimore, and Miami, Everstream said.
The impact of that clogged flow of goods will depend on how long the strike lasts, analysts with Moody’s said. The firm’s Moody’s Analytics division estimates the strike will cause a daily hit to the U.S. economy of at least $500 million in the coming days. But that impact will jump to $2 billion per day if the strike persists for several weeks.
The immediate cost of the strike can be seen in rising surcharges and rerouting delays, which can be absorbed by most enterprise-scale companies but hit small and medium-sized businesses particularly hard, a report from Container xChange says.
“The timing of this strike is especially challenging as we are in our traditional peak season. While many pulled forward shipments earlier this year to mitigate risks, stockpiled inventories will only cushion businesses for so long. If the strike continues for an extended period, we could see significant strain on container availability and shipping schedules,” Christian Roeloffs, cofounder and CEO of Container xChange, said in a release.
“For small and medium-sized container traders, this could result in skyrocketing logistics costs and delays, making it harder to secure containers. The longer the disruption lasts, the more difficult it will be for these businesses to keep pace with market demands,” Roeloffs said.
Jason Kra kicked off his presentation at the Council of Supply Chain Management Professionals (CSCMP) EDGE Conference on Tuesday morning with a question: “How do we use data in assessing what countries we should be investing in for future supply chain decisions?” As president of Li & Fung where he oversees the supply chain solutions company’s wholesale and distribution business in the U.S., Kra understands that many companies are looking for ways to assess risk in their supply chains and diversify their operations beyond China. To properly assess risk, however, you need quality data and a decision model, he said.
In January 2024, in addition to his full-time job, Kra joined American University’s Kogod School of Business as an adjunct professor of the school’s master’s program where he decided to find some answers to his above question about data.
For his research, he created the following situation: “How can data be used to assess the attractiveness of scalable apparel-producing countries for planning based on stability and predictability, and what factors should be considered in the decision-making process to de-risk country diversification decisions?”
Since diversification and resilience have been hot topics in the supply chain space since the U.S.’s 2017 trade war with China, Kra sought to find a way to apply a scientific method to assess supply chain risk. He specifically wanted to answer the following questions:
1.Which methodology is most appropriate to investigate when selecting a country to produce apparel in based on weighted criteria?
2.What criteria should be used to evaluate a production country’s suitability for scalable manufacturing as a future investment?
3.What are the weights (relative importance) of each criterion?
4.How can this methodology be utilized to assess the suitability of production countries for scalable apparel manufacturing and to create a country ranking?
5.Will the criteria and methodology apply to other industries?
After creating a list of criteria and weight rankings based on importance, Kra reached out to 70 senior managers with 20+ years of experience and C-suite executives to get their feedback. What he found was a big difference in criteria/weight rankings between the C-suite and senior managers.
“That huge gap is a good area for future research,” said Kra. “If you don’t have alignment between your C-suite and your senior managers who are doing a lot of the execution, you’re never going to achieve the goals you set as a company.”
With the research results, Kra created a decision model for country selection that can be applied to any industry and customized based on a company’s unique needs. That model includes discussing the data findings, creating a list of diversification countries, and finally, looking at future trends to factor in (like exponential technology, speed, types of supply chains and geopolitics, and sustainability).
After showcasing his research data to the EDGE audience, Kra ended his presentation by sharing some key takeaways from his research:
China diversification strategies alone are not enough. The world will continue to be volatile and disruptive. Country and region diversification is the only protection.
Managers need to balance trade-offs between what is optimal and what is acceptable regarding supply chain decisions. Decision-makers need to find the best country at the lowest price, with the most dependability.
There is a disconnect or misalignment between C-suite executives and senior managers who execute the strategy. So further education and alignment is critical.
Data-driven decision-making for your company/industry: This can be done for any industry—the data is customizable, and there are many “free” sources you can access to put together regional and country data. Utilizing data helps eliminate path dependency (for example, relying on a lean or just-in-time inventory) and keeps executives and managers aligned.
“Look at the business you envision in the future,” said Kra, “and make that your model for today.”
Turning around a failing warehouse operation demands a similar methodology to how emergency room doctors triage troubled patients at the hospital, a speaker said today in a session at the Council of Supply Chain Management Professionals (CSCMP)’s EDGE Conference in Nashville.
There are many reasons that a warehouse might start to miss its targets, such as a sudden volume increase or a new IT system implementation gone wrong, said Adri McCaskill, general manager for iPlan’s Warehouse Management business unit. But whatever the cause, the basic rescue strategy is the same: “Just like medicine, you do triage,” she said. “The most life-threatening problem we try to solve first. And only then, once we’ve stopped the bleeding, we can move on.”
In McCaskill’s comparison, just as a doctor might have to break some ribs through energetic CPR to get a patient’s heart beating again, a failing warehouse might need to recover by “breaking some ribs” in a business sense, such as making management changes or stock write-downs.
Once the business has made some stopgap solutions to “stop the bleeding,” it can proceed to a disciplined recovery, she said. And to reach their final goal, managers can use the classic tools of people, process, and technology to improve what she called the three most important key performance indicators (KPIs): on time in full (OTIF), inventory accuracy, and staff turnover.