Citing a need for improved safety practices, the suggested “crew redundancy” policy by the U.S. Department of Transportation’s Federal Railroad Administration (FRA) also proposes requirements for the location of crewmembers on a moving train, and would prohibit the operation of some trains with fewer than two crewmembers from transporting large amounts of certain hazardous materials.
But for safer runs, the rule would include flexible exceptions for certain low risk operations and circumstances where mitigating measures are in place to protect railroad employees, the public, and the environment.
The move resuscitates a concept first pushed by the FRA in 2016 following two rail accidents in Lac-Mégantic, Quebec, and in Casselton, North Dakota, where train loads of crude oil ignited after train wrecks and caused huge explosions that flattened buildings and killed residents. However, the Trump Administration’s FRA withdrew that notice of proposed rulemaking (NPRM) in 2019, following heated debate between rail industry groups and labor and environmental organizations.
One group that is already pushing back against the idea is the Association of American Railroads (AAR), a trade group for rail industry corporations. In a statement, the group called the revived NPRM “misguided” and said it would put freight rail at a long-term competitive disadvantage to less fuel-efficient modes of transportation. According to the AAR, other Department of Transportation modal agencies are working to support greater automation and technological safety benefits—such as positive train control (PTC)—but the FRA “stands alone in its efforts to lock in yesterday’s regulatory approaches.”
However, the government says the rule is needed to support safer operations, and is consistent with safety analysis required by other FRA regulations, including PTC, a technology suite that went live on U.S. rails in 2020 and can automatically stop a train before certain human-related accidents occur.
According to the FRA, the proposed rule would also replace an existing patchwork of conflicting state laws regarding crew size with a uniform national standard. Without consistent guidelines, railroads may be subjected to disparate requirements in every state in which they operate, resulting in potential safety risks, operational inefficiencies, and significant costs, the agency said.
“We are committed to data-driven decision making,” FRA Administrator Amit Bose said in a release. “In cases where railroads wish to operate with fewer than two crewmembers, we are proposing that they perform a rigorous, thorough, and transparent risk assessment and hazard analysis, and FRA will provide an opportunity for public comment on these submissions.”
As the Trump Administration threatens new steps in a growing trade war, U.S. manufacturers and retailers are calling for a ceasefire, saying the crossfire caused by the new tax hikes on American businesses will raise prices for consumers and possibly trigger rising inflation.
Tariffs are taxes charged by a country on its own businesses that import goods from other nations. Until they can invest in long-term alternatives like building new factories or finding new trading partners, companies must either take those additional tax duties out of their profit margins or pass them on to consumers as higher prices.
The Trump Administration on Thursday announced it may impose “reciprocal tariffs” on any country that currently holds tariffs on the import of U.S. goods. That step followed earlier threats to apply tariffs on the import of steel and aluminum beginning March 12, another plan to charge tariffs on the import of materials from Canada and Mexico—now postponed until early March—and new round of tariffs on imports from China including a 10% blanket increase and the elimination of the “de minimis” exception for individual items under a value of $800 each.
Various industry groups say that while the Administration may have legitimate goals in ramping up a trade war—such as lowering foreign tariff and non-tariff trade barriers—applying a strategy of hiking tariffs on imports coming into America would inflict economic harm on U.S. businesses and consumers.
“This tariff-heavy approach continues to gamble with our economic prosperity and is based on incomplete thinking about the vital role ethical and fairly traded imports play in the prosperity,” Steve Lamar, president and CEO of The American Apparel & Footwear Association (AAFA) said in a release. “Putting America first means ensuring predictability for American businesses that create U.S. jobs; affordable options for American consumers who power our economy; opportunities for farmers who feed our families; and support for tens of millions of U.S. workers whose trade dependent jobs make our factories, our stores, our warehouses, and our offices function. Sweeping new tariffs — a possible outcome of this exercise — instead puts America last, raising costs for American manufacturers for critical inputs and materials, closing key markets for American farmers, and raising prices for hardworking American families.”
A similar message came from the National Retail Federation (NRF), whose executive vice president of government relations, David French, said: “While we support the president’s efforts to reduce trade barriers and imbalances, this scale of undertaking is massive and will be extremely disruptive to our supply chains. It will likely result in higher prices for hardworking American families and will erode household spending power. We encourage the president to seek coordination and collaboration with our trading partners and bring stability to our supply chains and family budgets.”
The logistics tech firm Körber Supply Chain Software has a common position. "The imposition of new tariffs, or the suspension of tariffs, introduces substantial challenges for businesses dependent on international supply chains. Industries such as automotive and electronics, which rely heavily on cross-border trade with Mexico and Canada, are particularly vulnerable,” Steve Blough, Chief Strategist at Körber Supply Chain Software, said in an emailed statement. “Supply chains that are doing low-value ecommerce deliveries will have their business model thrown into complete disarray. The increased costs due to tariffs, or the increased costs in processing time due to suspensions, may lead to higher consumer prices and processing times.”
And further opposition to the strategy came from the California-based IT consulting firm Bristlecone. “Tariffs or the potential for tariffs increase uncertainty throughout the supply chain, potentially stalling deals, impacting the sourcing of raw materials, and prompting higher prices for consumers,” Jen Chew, Bristlecone’s VP of Solutions & Consulting, said in a statement. “Tariffs and other protectionist economic policies reflect an overarching trend away from global sourcing and toward local sourcing and production. However, despite the perceived benefits of local operations, some resources and capabilities may simply not be available locally, prompting manufacturers to continue operations overseas, even if it means paying steep tariffs.”
Warehouse automation orders declined by 3% in 2024, according to a February report from market research firm Interact Analysis. The company said the decline was due to economic, political, and market-specific challenges, including persistently high interest rates in many regions and the residual effects of an oversupply of warehouses built during the Covid-19 pandemic.
The research also found that increasing competition from Chinese vendors is expected to drive down prices and slow revenue growth over the report’s forecast period to 2030.
Global macro-economic factors such as high interest rates, political uncertainty around elections, and the Chinese real estate crisis have “significantly impacted sales cycles, slowing the pace of orders,” according to the report.
Despite the decline, analysts said growth is expected to pick up from 2025, which they said they anticipate will mark a year of slow recovery for the sector. Pre-pandemic growth levels are expected to return in 2026, with long-term expansion projected at a compound annual growth rate (CAGR) of 8% between 2024 and 2030.
The analysis also found two market segments that are bucking the trend: durable manufacturing and food & beverage industries continued to spend on automation during the downturn. Warehouse automation revenues in food & beverage, in particular, were bolstered by cold-chain automation, as well as by large-scale projects from consumer-packaged goods (CPG) manufacturers. The sectors registered the highest growth in warehouse automation revenues between 2022 and 2024, with increases of 11% (durable manufacturing) and 10% (food & beverage), according to the research.
New Jersey is home to the most congested freight bottleneck in the country for the seventh straight year, according to research from the American Transportation Research Institute (ATRI), released today.
ATRI’s annual list of the Top 100 Truck Bottlenecks aims to highlight the nation’s most congested highways and help local, state, and federal governments target funding to areas most in need of relief. The data show ways to reduce chokepoints, lower emissions, and drive economic growth, according to the researchers.
The 2025 Top Truck Bottleneck List measures the level of truck-involved congestion at more than 325 locations on the national highway system. The analysis is based on an extensive database of freight truck GPS data and uses several customized software applications and analysis methods, along with terabytes of data from trucking operations, to produce a congestion impact ranking for each location. The bottleneck locations detailed in the latest ATRI list represent the top 100 congested locations, although ATRI continuously monitors more than 325 freight-critical locations, the group said.
For the seventh straight year, the intersection of I-95 and State Route 4 near the George Washington Bridge in Fort Lee, New Jersey, is the top freight bottleneck in the country. The remaining top 10 bottlenecks include: Chicago, I-294 at I-290/I-88; Houston, I-45 at I-69/US 59; Atlanta, I-285 at I-85 (North); Nashville: I-24/I-40 at I-440 (East); Atlanta: I-75 at I-285 (North); Los Angeles, SR 60 at SR 57; Cincinnati, I-71 at I-75; Houston, I-10 at I-45; and Atlanta, I-20 at I-285 (West).
ATRI’s analysis, which utilized data from 2024, found that traffic conditions continue to deteriorate from recent years, partly due to work zones resulting from increased infrastructure investment. Average rush hour truck speeds were 34.2 miles per hour (MPH), down 3% from the previous year. Among the top 10 locations, average rush hour truck speeds were 29.7 MPH.
In addition to squandering time and money, these delays also waste fuel—with trucks burning an estimated 6.4 billion gallons of diesel fuel and producing more than 65 million metric tons of additional carbon emissions while stuck in traffic jams, according to ATRI.
On a positive note, ATRI said its analysis helps quantify the value of infrastructure investment, pointing to improvements at Chicago’s Jane Byrne Interchange as an example. Once the number one truck bottleneck in the country for three years in a row, the recently constructed interchange saw rush hour truck speeds improve by nearly 25% after construction was completed, according to the report.
“Delays inflicted on truckers by congestion are the equivalent of 436,000 drivers sitting idle for an entire year,” ATRI President and COO Rebecca Brewster said in a statement announcing the findings. “These metrics are getting worse, but the good news is that states do not need to accept the status quo. Illinois was once home to the top bottleneck in the country, but following a sustained effort to expand capacity, the Jane Byrne Interchange in Chicago no longer ranks in the top 10. This data gives policymakers a road map to reduce chokepoints, lower emissions, and drive economic growth.”
Know someone who is making a difference in the world of logistics? Then consider nominating that person as one of DC Velocity’s “Rainmakers”—professionals from all facets of the business whose achievements set them apart from the crowd. In the past, they have included practitioners, consultants, academics, vendors, and even military commanders.
To identify these achievers, DC Velocity’s editorial directors work with members of the magazine’s Editorial Advisory Board. The nomination process begins in January and concludes in April with a vote to determine which nominees will be invited to become Rainmakers.
It’s getting a little easier to find warehouse space in the U.S., as the frantic construction pace of recent years declined to pre-pandemic levels in the fourth quarter of 2024, in line with rising vacancies, according to a report from real estate firm Colliers.
Those trends played out as the gap between new building supply and tenants’ demand narrowed during 2024, the firm said in its “U.S. Industrial Market Outlook Report / Q4 2024.” By the numbers, developers delivered 400 million square feet for the year, 34% below the record 607 million square feet completed in 2023. And net absorption, a key measure of demand, declined by 27%, to 168 million square feet.
Consequently, the U.S. industrial vacancy rate rose by 126 basis points, to 6.8%, as construction activity normalized at year-end to pre-pandemic levels of below 300 million square feet. With supply and demand nearing equilibrium in 2025, the vacancy rate is expected to peak at around 7% before starting to fall again.
Thanks to those market conditions, renters of warehouse space should begin to see some relief from the steep rent hikes they’re seen in recent years. According to Colliers, rent growth decelerated in 2024 after nine consecutive quarters of year-over-year increases surpassing 10%. Average warehouse and distribution rents rose by 5% to $10.12/SF triple net, and rents in some markets actually declined following a period of unprecedented growth when increases often exceeded 25% year-over-year. As the market adjusts, rents are projected to stabilize in 2025, rising between 2% and 5%, in line with historical averages.
In 2024, there were 125 new occupancies of 500,000 square feet or more, led by third-party logistics (3PL) providers, followed by manufacturing companies. Demand peaked in the fourth quarter at 53 million square feet, while the first quarter had the lowest activity at 28 million square feet — the lowest quarterly tally since 2012.
In its economic outlook for the future, Colliers said the U.S. economy remains strong by most measures; with low unemployment, consumer spending surpassing expectations, positive GDP growth, and signs of improvement in manufacturing. However businesses still face challenges including persistent inflation, the lowest hiring rate since 2010, and uncertainties surrounding tariffs, migration, and policies introduced by the new Trump Administration.