Global full-year demand in 2022, as measured in cargo tonne-kilometers (CTKs), was down 8.0% compared to 2021 but was down just 1.6% compared to 2019. Meanwhile, air cargo capacity in 2022 moved in the other direction, finishing the year 3.0% above 2021 as measured in available cargo tonne-kilometers (ACTKs), but declining by 8.2% compared to 2019 (pre-COVID) levels.
Trends also showed that air freight may continue to slow in 2023, since global new export orders, a leading indicator of cargo demand, have been stalled at the same level since October. And new export orders for major economies are shrinking everywhere except for growth hot-spots in Germany, the U.S., and Japan.
One reason for that tepid forecast may be continued efforts by many nations to squeeze inflation rates by slowing down their own economies, IATA said. The Consumer Price Index (CPI) for G7 countries showed inflation of 6.8% for December, a 0.6 percentage point drop compared to the previous month, when that figure was at 7.4% for November. Likewise, inflation as measured by producer (input) prices reduced to 12.7% in October, its lowest level so far in 2022.
“In the face of significant political and economic uncertainties, air cargo performance declined compared to the extraordinary levels of 2021. That brought air cargo demand to 1.6% below 2019 (pre-pandemic) levels,” Willie Walsh, IATA’s director general, said in a release.
“The continuing measures by key governments to fight inflation by cooling economies are expected to result in a further decline in cargo volumes in 2023 to -5.6% compared to 2019. It will, however, take time for these measures to bite into cargo rates,” Walsh said. “So, the good news for air cargo is that average yields and total revenue for 2023 should remain well above what they were pre-pandemic. That should provide some respite in what is likely to be a challenging trading environment in the year ahead.”
Despite that quiet cargo environment, airlines also saw passenger demand rebound in 2022 from its pandemic morass. Total traffic in 2022 (measured in revenue passenger kilometers or RPKs) rose 64.4% compared to 2021, bringing the 2022 passenger traffic volume to 68.5% of pre-pandemic (2019) levels.
“The industry left 2022 in far stronger shape than it entered, as most governments lifted COVID-19 travel restrictions during the year and people took advantage of the restoration of their freedom to travel. This momentum is expected to continue in the New Year, despite some governments’ over-reactions to China’s re-opening,” Walsh said.
According to IATA, global travel bans during the pandemic had a bigger impact on depressing airlines’ business results than on preventing the spread of the disease. “Let us hope that 2022 becomes known as the year in which governments locked away forever the regulatory shackles that kept their citizens earthbound for so long,” Walsh said. “It is vital that governments learn the lesson that travel restrictions and border closures have little positive impact in terms of slowing the spread of infectious diseases in our globally inter-connected world. However, they have an enormous negative impact on people’s lives and livelihoods, as well as on the global economy that depends on the unfettered movement of people and goods.”
Artificial intelligence (AI) tools can help users build “smart and responsive supply chains” by increasing workforce productivity, expanding visibility, accelerating processes, and prioritizing the next best action to drive results, according to business software vendor Oracle.
To help reach that goal, the Texas company last week released software upgrades including user experience (UX) enhancements to its Oracle Fusion Cloud Supply Chain & Manufacturing (SCM) suite.
“Organizations are under pressure to create efficient and resilient supply chains that can quickly adapt to economic conditions, control costs, and protect margins,” Chris Leone, executive vice president, Applications Development, Oracle, said in a release. “The latest enhancements to Oracle Cloud SCM help customers create a smarter, more responsive supply chain by enabling them to optimize planning and execution and improve the speed and accuracy of processes.”
According to Oracle, specific upgrades feature changes to its:
Production Supervisor Workbench, which helps organizations improve manufacturing performance by providing real-time insight into work orders and generative AI-powered shift reporting.
Maintenance Supervisor Workbench, which helps organizations increase productivity and reduce asset downtime by resolving maintenance issues faster.
Order Management Enhancements, which help organizations increase operational performance by enabling users to quickly create and find orders, take actions, and engage customers.
Product Lifecycle Management (PLM) Enhancements, which help organizations accelerate product development and go-to-market by enabling users to quickly find items and configure critical objects and navigation paths to meet business-critical priorities.
Nearly one-third of American consumers have increased their secondhand purchases in the past year, revealing a jump in “recommerce” according to a buyer survey from ShipStation, a provider of web-based shipping and order fulfillment solutions.
The number comes from a survey of 500 U.S. consumers showing that nearly one in four (23%) Americans lack confidence in making purchases over $200 in the next six months. Due to economic uncertainty, savvy shoppers are looking for ways to save money without sacrificing quality or style, the research found.
Younger shoppers are leading the charge in that trend, with 59% of Gen Z and 48% of Millennials buying pre-owned items weekly or monthly. That rate makes Gen Z nearly twice as likely to buy second hand compared to older generations.
The primary reason that shoppers say they have increased their recommerce habits is lower prices (74%), followed by the thrill of finding unique or rare items (38%) and getting higher quality for a lower price (28%). Only 14% of Americans cite environmental concerns as a primary reason they shop second-hand.
Despite the challenge of adjusting to the new pattern, recommerce represents a strategic opportunity for businesses to capture today’s budget-minded shoppers and foster long-term loyalty, Austin, Texas-based ShipStation said.
For example, retailers don’t have to sell used goods to capitalize on the secondhand boom. Instead, they can offer trade-in programs swapping discounts or store credit for shoppers’ old items. And they can improve product discoverability to help customers—particularly older generations—find what they’re looking for.
Other ways for retailers to connect with recommerce shoppers are to improve shipping practices. According to ShipStation:
70% of shoppers won’t return to a brand if shipping is too expensive.
51% of consumers are turned off by late deliveries
40% of shoppers won’t return to a retailer again if the packaging is bad.
The “CMA CGM Startup Awards”—created in collaboration with BFM Business and La Tribune—will identify the best innovations to accelerate its transformation, the French company said.
Specifically, the company will select the best startup among the applicants, with clear industry transformation objectives focused on environmental performance, competitiveness, and quality of life at work in each of the three areas:
Shipping: Enabling safer, more efficient, and sustainable navigation through innovative technological solutions.
Logistics: Reinventing the global supply chain with smart and sustainable logistics solutions.
Media: Transform content creation, and customer engagement with innovative media technologies and strategies.
Three winners will be selected during a final event organized on November 15 at the Orange Vélodrome Stadium in Marseille, during the 2nd Artificial Intelligence Marseille (AIM) forum organized by La Tribune and BFM Business. The selection will be made by a jury chaired by Rodolphe Saadé, Chairman and CEO of the Group, and including members of the executive committee representing the various sectors of CMA CGM.
Businesses were preparing to deal with the effects of the latest major storm of the 2024 hurricane season as Francine barreled toward the Gulf Coast Wednesday.
Louisiana was experiencing heavy rain and wind gusts at midday as the storm moved northeast through the Gulf and was expected to pick up speed. The state will bear the brunt of Francine’s wind, rain, and storm damage, according to forecasters at weather service provider AccuWeather.
“AccuWeather meteorologists are projecting a storm surge of 6-10 feet along much of the Louisiana coast with a pocket of 10-15 feet on some of the inland bays in south-central Louisiana,” the company reported in an afternoon update Wednesday.
Businesses and supply chains were prepping for delays and disruptions from the storm earlier this week. Supply chain mapping and monitoring firm Resilinc said the storm will have a “significant impact” on a wide range of industries along the Gulf Coast, including aerospace, life sciences, manufacturing, oil and gas, and high-tech, among others. In a statement, Resilinc said energy companies had evacuated personnel and suspended operations on oil platforms as of Tuesday. In addition, the firm said its proprietary data showed the storm could affect nearly 11,000 manufacturing, warehousing, distribution, fabrication, and testing sites across the region, putting at risk more than 57,000 parts used in everyday items and the manufacture of more than 4,000 products.
Francine, which was expected to make landfall as a category 2 hurricane, according to AccuWeather, follows the devastating effects of two storms earlier this summer: Hurricane Beryl, which hit the Texas coast in July, and Hurricane Debby, which caused $28 billion in damage and economic loss after hitting the Southeast on August 5.
The Raymond Corp. has expanded its energy storage solutions business with the opening of a manufacturing plant that will produce lithium-ion and thin plate pure lead (TPPL) batteries for its forklifts and other material handling equipment. Located in Binghamton, N.Y., Raymond’s Energy Solutions Manufacturing Center of Excellence adds to the more than 100-year-old company’s commitment to supporting the local economy and reinvigorating Upstate New York as an innovation hub, according to company officials and local government and business leaders who gathered for a ribbon cutting and grand opening this week.
“This region has a rich history of innovation,” Jennifer Lupo, Raymond’s vice president of energy solutions, supply chain, and leasing, said in welcoming attendees to the ribbon cutting ceremony Monday.
Lupo referred to the new factory as an “exciting milestone” in Raymond’s history and described it as the next step in the company’s energy storage solutions business, which began nearly 10 years ago with the development of a lithium-ion battery to power its “walkie” pallet jack. That work has expanded to include larger batteries and other technologies to support battery-electric equipment.
“We’re not just keeping up with the electrification movement,” Lupo said. “We’re leading it.”
Raymond, a business unit of Toyota Material Handling, has been building forklifts, pallet jacks, and other material handling equipment at its nearby Greene, New York, headquarters since 1922. The Binghamton factory supports local efforts to boost manufacturing and innovation in New York’s Southern Tier, which was recently designated as a regional technology and innovation hub by the Biden Administration.
Raymond is leasing the 124,000 square foot facility at 196 Corporate Drive, situated in an established industrial park. The manufacturer is currently utilizing just 10,000 square feet of the space to produce its 8250 lithium-ion battery, which can power Raymond’s class 1 and class 2 fork trucks, as well as a smaller TPPL battery for powering pallet jacks.
The Binghamton factory employs 15 people, but the company expects to scale up quickly in space and personnel, adding 12 to 25 employees next year and ramping up to 60 employees by 2027, according to Jim Priestly, battery manufacturing manager for energy solutions at Raymond.
The Binghamton facility also represents Raymond’s larger commitment to helping develop greener, more sustainable supply chains, according to company President and CEO Michael Field.
“We recognize energy’s critical role in shaping our future,” Field told attendees at the grand opening, adding that Raymond is seizing the opportunity to participate in the clean energy transition locally and beyond.
“This facility is just the beginning,” Field said.