FTR: trucking conditions remained in “solidly negative territory” in July
Outlook for trucking conditions may only improve to neutral by the third quarter of 2024, as sector struggles with low freight rates and volatile fuel costs
FTR’s Trucking Conditions Index (TCI) was slightly less negative in July at -5.34 than June’s -6.29 reading as improved freight volume and capacity utilization offset weaker freight rates and higher fuel costs, the Indiana-based firm said.
That picture doesn’t look likely to improve anytime soon, as carriers continue to face challenging market conditions, and surging fuel prices in August and September will send the TCI even lower in the near term, FTR said. Aside from fuel cost volatility, the outlook for trucking conditions is little changed with only gradual improvement toward neutral readings by the third quarter of 2024.
“The overall truck freight market remains unfavorable for trucking companies, but the financial situation for smaller carriers in particular is tightening due to surging diesel prices,” Avery Vise, FTR’s vice president of trucking, said in a release. “Large numbers of small operations are exiting the market, and that exodus could accelerate if diesel prices continue to rise sharply. So far, the data suggests that larger carriers have absorbed much of that driver capacity, but truckload carriers are approaching a saturation point due to sluggish freight demand. Declining driver capacity could tighten the market modestly, but significant improvement for carriers will require stronger volume as well.”
FTR creates the TCI by tracking five conditions in the U.S. truck market: freight volumes, freight rates, fleet capacity, fuel prices, and financing costs. Combined into a single index number, the result shows good conditions when positive and bad conditions when negative.
The number of container ships waiting outside U.S. East and Gulf Coast ports has swelled from just three vessels on Sunday to 54 on Thursday as a dockworker strike has swiftly halted bustling container traffic at some of the nation’s business facilities, according to analysis by Everstream Analytics.
As of Thursday morning, the two ports with the biggest traffic jams are Savannah (15 ships) and New York (14), followed by single-digit numbers at Mobile, Charleston, Houston, Philadelphia, Norfolk, Baltimore, and Miami, Everstream said.
The impact of that clogged flow of goods will depend on how long the strike lasts, analysts with Moody’s said. The firm’s Moody’s Analytics division estimates the strike will cause a daily hit to the U.S. economy of at least $500 million in the coming days. But that impact will jump to $2 billion per day if the strike persists for several weeks.
The immediate cost of the strike can be seen in rising surcharges and rerouting delays, which can be absorbed by most enterprise-scale companies but hit small and medium-sized businesses particularly hard, a report from Container xChange says.
“The timing of this strike is especially challenging as we are in our traditional peak season. While many pulled forward shipments earlier this year to mitigate risks, stockpiled inventories will only cushion businesses for so long. If the strike continues for an extended period, we could see significant strain on container availability and shipping schedules,” Christian Roeloffs, cofounder and CEO of Container xChange, said in a release.
“For small and medium-sized container traders, this could result in skyrocketing logistics costs and delays, making it harder to secure containers. The longer the disruption lasts, the more difficult it will be for these businesses to keep pace with market demands,” Roeloffs said.
Jason Kra kicked off his presentation at the Council of Supply Chain Management Professionals (CSCMP) EDGE Conference on Tuesday morning with a question: “How do we use data in assessing what countries we should be investing in for future supply chain decisions?” As president of Li & Fung where he oversees the supply chain solutions company’s wholesale and distribution business in the U.S., Kra understands that many companies are looking for ways to assess risk in their supply chains and diversify their operations beyond China. To properly assess risk, however, you need quality data and a decision model, he said.
In January 2024, in addition to his full-time job, Kra joined American University’s Kogod School of Business as an adjunct professor of the school’s master’s program where he decided to find some answers to his above question about data.
For his research, he created the following situation: “How can data be used to assess the attractiveness of scalable apparel-producing countries for planning based on stability and predictability, and what factors should be considered in the decision-making process to de-risk country diversification decisions?”
Since diversification and resilience have been hot topics in the supply chain space since the U.S.’s 2017 trade war with China, Kra sought to find a way to apply a scientific method to assess supply chain risk. He specifically wanted to answer the following questions:
1.Which methodology is most appropriate to investigate when selecting a country to produce apparel in based on weighted criteria?
2.What criteria should be used to evaluate a production country’s suitability for scalable manufacturing as a future investment?
3.What are the weights (relative importance) of each criterion?
4.How can this methodology be utilized to assess the suitability of production countries for scalable apparel manufacturing and to create a country ranking?
5.Will the criteria and methodology apply to other industries?
After creating a list of criteria and weight rankings based on importance, Kra reached out to 70 senior managers with 20+ years of experience and C-suite executives to get their feedback. What he found was a big difference in criteria/weight rankings between the C-suite and senior managers.
“That huge gap is a good area for future research,” said Kra. “If you don’t have alignment between your C-suite and your senior managers who are doing a lot of the execution, you’re never going to achieve the goals you set as a company.”
With the research results, Kra created a decision model for country selection that can be applied to any industry and customized based on a company’s unique needs. That model includes discussing the data findings, creating a list of diversification countries, and finally, looking at future trends to factor in (like exponential technology, speed, types of supply chains and geopolitics, and sustainability).
After showcasing his research data to the EDGE audience, Kra ended his presentation by sharing some key takeaways from his research:
China diversification strategies alone are not enough. The world will continue to be volatile and disruptive. Country and region diversification is the only protection.
Managers need to balance trade-offs between what is optimal and what is acceptable regarding supply chain decisions. Decision-makers need to find the best country at the lowest price, with the most dependability.
There is a disconnect or misalignment between C-suite executives and senior managers who execute the strategy. So further education and alignment is critical.
Data-driven decision-making for your company/industry: This can be done for any industry—the data is customizable, and there are many “free” sources you can access to put together regional and country data. Utilizing data helps eliminate path dependency (for example, relying on a lean or just-in-time inventory) and keeps executives and managers aligned.
“Look at the business you envision in the future,” said Kra, “and make that your model for today.”
Turning around a failing warehouse operation demands a similar methodology to how emergency room doctors triage troubled patients at the hospital, a speaker said today in a session at the Council of Supply Chain Management Professionals (CSCMP)’s EDGE Conference in Nashville.
There are many reasons that a warehouse might start to miss its targets, such as a sudden volume increase or a new IT system implementation gone wrong, said Adri McCaskill, general manager for iPlan’s Warehouse Management business unit. But whatever the cause, the basic rescue strategy is the same: “Just like medicine, you do triage,” she said. “The most life-threatening problem we try to solve first. And only then, once we’ve stopped the bleeding, we can move on.”
In McCaskill’s comparison, just as a doctor might have to break some ribs through energetic CPR to get a patient’s heart beating again, a failing warehouse might need to recover by “breaking some ribs” in a business sense, such as making management changes or stock write-downs.
Once the business has made some stopgap solutions to “stop the bleeding,” it can proceed to a disciplined recovery, she said. And to reach their final goal, managers can use the classic tools of people, process, and technology to improve what she called the three most important key performance indicators (KPIs): on time in full (OTIF), inventory accuracy, and staff turnover.
The relationship between shippers and third-party logistics services providers (3PLs) is at the core of successful supply chain management—so getting that relationship right is vital. A panel of industry experts from both sides of the aisle weighed in on what it takes to create strong 3PL/shipper partnerships on day two of the CSCMP EDGE conference, being held this week in Nashville.
Trust, empathy, and transparency ranked high on the list of key elements required for success in all aspects of the partnership, but there are some specifics for each step of the journey. The panel recommended a handful of actions that should take place early on, including:
Establish relationships.
For 3PLs, understand and get to the heart of the shipper’s data.
Also for 3PLs: Understand the shipper’s reason for outsourcing to a 3PL, along with the shipper’s ultimate goals.
Understand company cultures and be sure they align.
Nurture long-term relationships with good communication.
For shippers, be transparent so that the 3PL fully understands your business.
And there are also some “non-negotiables” when it comes to managing the relationship:
3PLs must demonstrate their commitment to engaging with the shipper’s personnel.
3PLs must also demonstrate their commitment to process discipline, continuous improvement, and innovation.
Shippers should ensure that they understand the 3PL’s demonstrated implementation capabilities—ask to visit established clients.
Trust—which takes longer to establish than both sides may expect.
EDGE 2024 is sponsored by the Council of Supply Chain Management Professionals (CSCMP) and runs through Wednesday, October 2, at the Gaylord Opryland Resort & Convention Center in Nashville.
While the Council of Supply Chain Management Professionals' 2024 EDGE Conference & Exhibition is coming to a close on Wednesday, October 2, in Nashville, Tennessee, mark your calendars for next year's premier supply chain event.
The 2025 conference will take place in National Harbor, Maryland. To register for next year's event—and take advantage of an early-bird discount of $600**—visit https://www.cscmpedge.org/website/62261/edge-2025/.
**EDGE EARLY BIRD Terms & Conditions: Promotion is for the EDGE 2025 conference in National Harbor, Maryland. Offer valid for Premier and Basic Members only. Offer excludes Student, Young Professional, Educator, and Corporate registration types. Offer limited to one per customer. Offer is not retroactive and may not be combined with other offers. Offer is nontransferable and may not be resold. Valid through October 31, 2024.