As U.S. businesses count down the days until the expiration of the Trump Administration’s monthlong pause of tariffs on Canada and Mexico, a report from Uber Freight says the tariffs will likely be avoided through an extended agreement, since the potential for damaging consequences would be so severe for all parties.
If the tariffs occurred, they could push U.S. inflation higher, adding $1,000 to $1,200 to the average person's cost of living. And relief from interest rates would likely not come to the rescue, since inflation is already above the Fed's target, delaying further rate cuts.
A potential impact of the tariffs in the long run might be to boost domestic freight by giving local manufacturers an edge. However, the magnitude and sudden implementation of these tariffs means we likely won't see such benefits for a while, and the immediate damage will be more significant in the meantime, Uber Freight said in its “2025 Q1 Market update & outlook.”
That market volatility comes even as tough times continue in the freight market. In the U.S. full truckload sector, the cost per loaded mile currently exceeds spot rates significantly, which will likely push rate increases.
However, in the first quarter of 2025, spot rates are now falling, as they usually do in February following the winter peak. According to Uber Freight, this situation arose after truck operating costs rose 2 cents/mile in 2023 despite a 9-cent diesel price decline, thanks to increases in insurance (+13%), truck and trailer costs (+9%), and driver wages (+8%). Costs then fell 2 cents/mile in 2024, resulting in stable costs over the past two years.
Fortunately, Uber Freight predicts that the freight cycle could soon begin to turn, as signs of a recovery are emerging despite weak current demand. A measure of manufacturing growth called the ISM PMI edged up to 50.9 in December, surpassing the expansion threshold for the first time in 26 months.
Accordingly, new orders and production increased while employment stabilized. That means the U.S. manufacturing economy appears to be expanding after a prolonged period of contraction, signaling a positive outlook for freight demand, Uber Freight said.
Atlanta, GA, Feb 6, 2025 - Today Exotec®︎, a global warehouse robotics provider, announced the commercial launch of the Next Generation of Skypod®︎ system with higher performance, improved storage density, and advanced software features.
The Next Generation of Skypod comes with a number of design improvements including a new and more compact Skypod robot, a workstation for robot-to-robot picking, high-throughput Exchanger, and denser storage. These redesigns combined with new software features improve the throughput at a single workstation by 50% while also enhancing storage density up to 30% compared to the previous generation.
The key differentiator for the Next Generation of Skypod is the ability to handle both each and case picking, positioning Exotec to better address multichannel needs with a single solution. The system also natively supports a number of value-added logistics features that traditionally require external equipment and complex subsystems. This not only enables customers to simplify the flow of goods through the warehouse, but also significantly shrinks the system footprint by cutting down the need for conveyors, sorters, external storage, and packing stations.
Specifically, the Next Generation of Skypod supports:
Integrated Buffer: Next-Gen Skypod handles buffering within the system. Following order preparation at the Workstation, completed or semi-completed orders get automatically stored inside the racks until they are ready for outbound, or further consolidation. This helps reduce the need for staging areas or any other external buffer systems.
Perfect Sequencing: Next-Gen Skypod handles strict outbound sequencing prior to ejecting orders by using robots and the Exchanger. The robots group orders and deliver them in a specific arrangement to the Exchanger, which then routes the orders to outbound. This enables precise loading of pallets, containers, or trucks based on delivery routes, store planograms, or other unloading requirements, all without the need for external sorting equipment.
Pick-and-Pack: Next-Gen Skypod handles packing as an integrated part of the picking process. Operators pick directly into fulfillment containers, removing the need for manual packing operations downstream. This functionality pairs extremely well with right-size packaging solutions. These solutions can be integrated with Next-Gen Skypod to enable picking into right-size containers, significantly cutting last-mile costs.
“When designing the Next Generation Skypod, our goal was to create a solution that would set the industry standard of operational excellence and elegance for the next decade and beyond," said Romain Moulin, CEO and co-founder of Exotec. “We’re already seeing our customers reimagine their entire supply chain around the transformative capabilities of this innovation, from combining case and each picking operations to leveraging outbound sequencing to improve transportation costs. Witnessing this level of impact has been incredibly rewarding.”
Exotec developed the Next Generation of Skypod in response to evolving market needs and feedback from the existing customer base, which increasingly demands warehouse robotics to address a wider range of processes within the warehouse walls. Over the past two years, Exotec has sold and deployed the Next Generation Skypod system globally in stealth mode. The company has successfully secured over 20 projects worldwide, totaling $400M to customers including Oxford Industries (Tommy Bahama, Lilly Pulitzer, Southern Tide, etc.), Grainger, and E.Leclerc to strengthen their supply chain operations.
“We chose Exotec for its storage density and its operational flexibility. Robotic advancements have enabled us to set up a larger buffer area for prepared orders within the system,” said Maxence Maurice, CEO E. Leclerc Seclin. “Previously, I estimated that the customer journey, from arriving at the drive to leaving with their groceries, took between 10 and 15 minutes. Today, with the Exotec solution, it takes less than 5 minutes.”
For more information on the Next Generation of Skypod system, please visit www.exotec.com.
###
About Exotec Exotec is a global warehouse robotics company powering the world's largest brands. The company combines the best of hardware and software to offer elegant warehouse robotic systems that drive operational efficiency, add resiliency, and improve working conditions for warehouse operators. 50+ industry-leading brands including Gap Inc., Carrefour, Decathlon, and UNIQLO trust Exotec to improve their operations across 100+ sites worldwide.
Walk into any high-velocity distribution facility and you'll immediately grasp the complexity: dozens of forklifts move in orchestrated patterns while automated systems hum along conveyor lines, all working to meet demanding throughput targets. Yet what remains invisible to the casual observer is how maintenance challenges can bring this carefully choreographed dance to a halt.
For facilities moving millions of pieces weekly, maintenance demands fundamentally different solutions. The traditional approach to material handling maintenance that works for smaller operations isn't just constraining productivity—it's holding back your entire operation.
Warning signs that you need an upgrade
For facility leaders managing 40+ forklifts and complex material handling systems, the warning signs often hide in plain sight. The first clear indicator that your current maintenance strategy isn't keeping pace with your high-velocity facility appears when equipment downtime increasingly affects your ability to meet throughput targets. This challenge is compounded by climbing rental equipment costs as you struggle to compensate for unavailable machinery. The human impact becomes evident when floor supervisors and staff begin expressing mounting frustration about not having the machinery they need available to do their job.
More concerning still, safety incidents related to equipment issues may become more frequent, creating both operational and liability risks. The financial strain finally manifests in mounting overtime costs because you simply don't have enough functioning equipment to run operations efficiently. These interconnected issues signal a maintenance strategy that needs urgent reevaluation and restructuring.
If these symptoms sound familiar, you're not alone. Many high-velocity facilities have outgrown the same maintenance principles they applied as a smaller operation, only to find them inadequate at scale.
The scale challenge
The complexity of a large facility creates unique challenges that make traditional maintenance approaches insufficient. Equipment diversity presents a significant hurdle, as larger facilities must manage multiple types of forklifts, automated systems, and specialized equipment, each requiring different maintenance expertise and parts inventories. Communication complexity also poses a major challenge—while information flows easily in smaller facilities where everyone knows the status of every piece of equipment, this informal communication breaks down in large operations with multiple shifts.
The scale of impact becomes exponentially more significant in high-velocity facilities, where a single forklift breakdown in a critical area can impact dozens of downstream processes. Maintenance timing presents another crucial challenge, as continuous operations and high utilization rates make it increasingly difficult to find maintenance windows, and waiting for equipment to fail is simply not an option.
Building a maintenance strategy that matches your scale
High-velocity facilities require a transformed maintenance approach, not just scaled-up traditional processes. This starts with dedicated on-site teams who develop deep facility knowledge and conduct preventive maintenance strategically during optimal windows. Smart inventory management of parts ensures critical components are always available without overstocking, while data-driven systems help track equipment performance patterns and guide future investment decisions.
Before investing millions in facility expansion or automation, consider this: Implementing proper maintenance strategies can boost productivity 10%-20% at a fraction of the cost of facility expansion or automation. This comprehensive approach leads to reduced equipment downtime, improved safety outcomes, and enhanced staff satisfaction by transforming maintenance from a reactive necessity into a proactive tool for operational excellence.
Ready to transform your maintenance strategy? Here are the key steps to implementation:
Start with a thorough assessment phase, reviewing safety incidents, analyzing current maintenance costs, and evaluating how maintenance affects facility key performance indicators (KPIs).
Develop tailored processes by establishing proper preventive maintenance procedures and implementing robust data collection protocols.
Structure your maintenance team effectively, with clear roles, communication protocols across shifts, and comprehensive training programs.
By taking this methodical approach to maintenance strategy, facilities can achieve operational excellence without the massive capital expenditure typically associated with major operational improvements. The key lies not in maintaining more, but in maintaining smarter.
In today's fast-paced distribution environment, your maintenance strategy can't be an afterthought—it needs to be as sophisticated as your operations. In high-velocity facilities. Maintenance isn't just about fixing equipment, it's about maintaining productivity, safety, and competitive advantage. The time to evolve your maintenance strategy is now, before considering more costly alternatives. Your facility's full potential depends on it.
About the Author: Cory Monroe is Regional Sales Director at Concentric, a national distributed power services organization specializing in maintenance and power solutions that deliver resilient and sustainable facility systems for critical power and forklift mobility.
In a statement, DCA airport officials said they would open the facility again today for flights after planes were grounded for more than 12 hours. “Reagan National airport will resume flight operations at 11:00am. All airport roads and terminals are open. Some flights have been delayed or cancelled, so passengers are encouraged to check with their airline for specific flight information,” the facility said in a social media post.
An investigation into the cause of the crash is now underway, being led by the National Transportation Safety Board (NTSB) and assisted by the Federal Aviation Administration (FAA). Neither agency had released additional information yet today.
First responders say nearly 70 people may have died in the crash, including all 60 passengers and four crew on the American Airlines flight and three soldiers in the military helicopter after both aircraft appeared to explode upon impact and fall into the Potomac River.
Editor's note:This article was revised on February 3.
Reducing empty miles—or the distance traveled with no load or cargo—can have multiple benefits, including increased cost savings and streamlined operations. But at its core, it’s about making smarter, more sustainable choices while transporting goods. Here are three components to craft and execute a successful empty miles program, keeping collaboration in mind at each stop along the way.
1. Route Optimization: Streamlining Your Routes to Minimize Empty Miles
Eliminating empty miles begins with route optimization. By analyzing traffic patterns, delivery windows, and geographical distances, logistics leaders can uncover opportunities in their network to minimize empty miles. You can think of route optimization as a more advanced version of strategies used every day by commuters, who adjust their errands to avoid rush-hour traffic, efficiently visit stores in the same shopping center, and use backroads to bypass slowdowns.
To overcome route challenges, organizations should invest in new tools and technology like real-time planning software that helps companies to adjust routes dynamically. These enterprise tools go beyond finding the shortest paths between destinations and unlock granular data on various factors like delivery time windows and vehicle capacity to ensure operations run as smoothly as possible.
Some cutting-edge solutions use artificial intelligence (AI) and machine learning to continuously adjust routes, improve overall productivity, and even boost customer satisfaction rates with reliable tracking information.
To understand what solutions are needed to maximize route potential, companies should evaluate their internal resources and capabilities, as well as consider the type of fleet they manage. For instance, there’s more visibility and direct influence over a private fleet compared to operating through a third party, so the approach may differ in each scenario.
2. Lane Matching & Transportation Collaboration: Team Up to Boost Efficiency and Drive Sustainability
Consider this: According to the U.S. Environmental Protection Agency (EPA), transportation accounted for the largest portion of total greenhouse gas (GHG) emissions in 2022. Now, picture a world where every truck journey is diligently planned to minimize empty space, limit miles on the road and maximize delivery potential—all of which can contribute to reduced greenhouse gas emissions.
This vision becomes reality through collaborative efforts between shippers and carriers. By strategically matching trucks with loads that share similar routes, businesses can drastically reduce their empty miles, helping their bottom line, and the planet. Leaders should look for these lane-matching opportunities, even if that means putting aside competitive differences in the name of the partnership.
Imagine two companies with fast-moving goods that are both sending partial loads down similar routes. By lane sharing and working together to combine these hauls into one truckload, both companies limit the miles spent on the road and improve their asset utilization.
Another form of transportation collaboration involves strategic pickups and returns. Think about the practical example of dropping off pallets along a route and conveniently picking up finished goods from customers on the return trip. This method improves truck capacity while significantly reducing the carbon footprint in each journey.
These key examples underscore the power of partnerships in achieving mutual goals, demonstrating the success industry players can have when they work together toward common objectives.
3. Unit Load Planning: Maximizing Your Space to Reduce Costs
The American Council for an Energy Efficient Economy (AEEE) estimates that 20%-35% of trucks are driven empty, and those that aren’t empty carry just 57% of their capacity. Effective unit load optimization goes beyond filling truck space—it ensures that every cubic inch is utilized to its fullest potential.
Take employees restocking grocery store shelves, for example. In this scenario, load planning maximization looks like stacking cans on top of each other to fit more on a shelf or pulling out better-selling product collections to their own stand-alone display. By actively planning where each product will go, employees can better stock the items and consolidate the number of carts needed to move products.
Within the supply network, companies can explore solutions to optimize their load planning. One includes leveraging test centers, which can uncover invaluable insights into optimal stacking and loading configurations by simulating various scenarios and measuring their outcomes. Taking this a step further, companies can look to adjust their product packaging or transport platforms, such as transitioning to collapsible containers to maximize space. These types of decisions can also translate into substantial cost savings through reductions in labor and handling, pallet costs, and transportation expenses.
Using Technology to Drive Success
While collaboration and strategic planning is fundamental, the impact is even bigger when supported by next-gen technologies. McKinsey reports that 68% of logistics providers and 56% of shippers have invested more in advanced transportation solutions like real-time transportation visibility, route optimization, and telematics since 2020.
These platforms streamline the process of identifying suitable partners by not only considering supply chain variables like anticipated demand but also brand-level commitments like environmental, social, and governance (ESG) objectives. By delivering automated insights, digital solutions empower supply chain leaders to make informed, data-driven decisions to achieve business goals through the best-fit solutions and partnerships.
It's More Than Empty Miles
For many years, businesses have accepted empty miles as a cost of doing business. But the tangible outcomes of collaborative efforts speak volumes. Customer data shows that last year in North America alone, businesses leveraging CHEP’s transportation solutions eliminated approximately 4.7 million empty miles and more than 15 million pounds of C02 from their transportation networks.
When business leaders shift their perspective to recognize that this strategy is more than empty miles, they unlock the future of the supply chain. If companies work together, leverage the latest technology and actively look to better their lane and route strategies, it’s possible to create a more sustainable, productive and resilient supply network.
About the author: Dan Ahrens is the director of Customer Solutions & Zero Waste World at CHEP North America.
GE Vernova today said it plans to invest nearly $600 million in its U.S. factories and facilities over the next two years to support its energy businesses, which make equipment for generating electricity through gas power, grid, nuclear, and onshore wind.
The company was created just nine months ago as a spin-off from its parent corporation, General Electric, with a mission to meet surging global electricity demands. That move created a company with some 18,000 workers across 50 states in the U.S., with 18 U.S. manufacturing facilities and its global headquarters located in Massachusetts. GE Vernova’s technology helps produce approximately 25% of the world’s energy and is currently deployed in more than 140 countries.
The new investments – expected to create approximately 1,500 new U.S. jobs – will help drive U.S. energy affordability, national security, and competitiveness, and enable the American manufacturing footprint needed to support expanding global exports, the company said. They follow more than $167 million in funding in 2024 across a range of GE Vernova sites, helping create more than 1,120 jobs. And following a forecast that worldwide energy needs are on pace to double, GE Vernova is also planning a $9 billion cumulative global capex and R&D investment plan through 2028.
The new investments include:
almost $300 million in support of its Gas Power business and build-out of capacity to make heavy duty gas turbines, for facilities in Greenville, SC, Schenectady, NY, Parsippany, NJ, and Bangor, ME.
nearly $20 million to expand capacity at its Grid Solutions facilities in Charleroi, PA, which manufactures switchgear, and Clearwater, FL, which produces capacitors and instrument transformers.
more than $50 million to enhance safety, quality and productivity at its Wilmington, NC-based GE Hitachi nuclear business and to launch its next generation nuclear fuel design.
nearly $100 million in its manufacturing facilities at U.S. onshore wind factories in Pensacola, FL, Schenectady, NY and Grand Forks, ND, and its remanufacturing facilities in Amarillo, TX.
more than $10 million in its Pittsburgh, PA facility to expand capabilities across its Electrification segment, adding U.S. manufacturing capacity to support the U.S. grid, and demand for solar and energy storage
almost $100 million for its energy innovation research hub, the Advanced Research Center in Niskayuna, NY, to strengthen the center’s electrification and carbon efforts, enable continued recruitment of top-tier talent, and push forward innovative technologies, including $15 million for Generative Artificial Intelligence (AI) work.
“These investments represent our serious commitment and responsibility as the leading energy manufacturer in the United States to help meet America’s and the world’s accelerating energy demand,” Scott Strazik, CEO of GE Vernova, said in a release. “These strategic investments and the jobs they create aim to both help our customers meet the doubling of demand and accelerate American innovation and technology development to boost the country’s energy security and global competitiveness.”